Section 11 Products Menu; Overview - Hach ORBISPHERE G1100 User Manual

Section 11

11.1 Overview

This option allows users to save and/or use previously saved product configurations. A
maximum of 100 different product configurations can be stored in the instrument. The basic
measurement configuration (gas to analyze, gas unit, alarm limits, analog outputs, etc.) can be
set up for a product and will be automatically used by the instrument when that product is
selected.
Product configurations can be moved from instrument to instrument if required. However, as the
sensor only analyzes oxygen, only products configured to analyze oxygen can be selected on
this instrument. Products configured to analyze other gases can, however, be set up on this
instrument and easily transferred to other 410 or 510 instruments analyzing gases other than
oxygen.
For ease of use, where product configurations are identical or similar, a Copy facility exists on
the modify product screen. This enables copying a stored configuration and storing it in one or
more additional locations. Then use the modify product option to identify and/or modify the
duplicate configurations.
Products Menu
Figure 41 Products menu
87