Menu Navigation; Rolling List; Virtual Keyboard - Hach ORBISPHERE G1100 User Manual

4.2.2 Menu navigation

Figure 23 Main menu window

4.2.3 Rolling list

4.2.4 Virtual keyboard

Figure 25 Virtual editing
Return to previous menu (one step back)
Jump directly to main menu
Close the menu and go back to measurement view display. If the
menu button is pressed again, the menu returns to its previous state
(tree structure is saved)
Help topics concerning current menu
Figure 24 Rolling list
example
keyboard
Pressing the "menu" button in the header bar calls the main
menu. The display is made of three columns:
The left column is the menus, or submenus (greyed out
•
options are not available)
The center column shows a tree view of actual position
•
inside the menu structure
The right column has the generic controls detailed below.
•
For convenience, selection through a possible large list of
items has been designed with a rolling list, like in this
example. Use the up and down arrow to navigate, or select
directly one item and press OK.
When a text box (alphanumeric field) has to be edited and is
pressed, a virtual keyboard appears on screen. It can be used
as a PC keyboard (pressing CAP gives access to special
keys).
Once values have been entered, press the Enter key to
confirm and exit the virtual keyboard.
During the editing, the edited field name is displayed, along
with units where applicable.
User Interface
41