Connection Panel (Bottom Of Instrument); Panel Mount Instrument; Instrument Dimensions - Hach ORBISPHERE G1100 User Manual

3.3.4 Connection panel (bottom of instrument)

Front panel door
A square key is provided to open the instrument front panel locks. The two locks are located on
the right side of the instrument on the top and bottom panels (number 12 in
The front panel can be easily pivoted to the left as shown below. To retain the instrument
waterproof tightness, make sure the seal is clean and in good condition before closing the front
panel.
1. Power cable
2. USB-B 4 pin connector (reserved for
3. Ethernet cable gland
4. Sensor - temperature connection (black
5. Sensor - red cable connection
6. Sensor - blue cable connection
Note: The type of connection will vary depending on the instrument specification.

3.4 Panel mount instrument

3.4.1 Instrument dimensions

Hach Lange service technicians)
cable)
Figure 7 Wall and pipe mount connection
panel
7. USB-A host connector for mass storage
device
8. External pressure sensor connection
9. Flow chamber solenoid valve connection
10. Input/Output 2 cable gland
11. Input/Output 1 cable gland
12. Keylock
Installation
Figure 7 below).
25