Section 10 Security Menu; Access Rights Management - Hach ORBISPHERE G1100 User Manual

Section 10 Security Menu

Note: When the instrument is started for the very first time, security is disabled by default. It is highly
recommended that each user be entered into the system and given appropriate access rights as soon as
possible to avoid any unauthorized access. Details of this process are described in this section.

10.1 Access rights management

Each user has a unique ID and user password. The ID and password are used by the software
to:
Allow or deny a user to perform specific actions.
•
To trace this action with his "ID" in a log file.
•
Once the ID and password are entered, the user is allowed to perform actions according to the
"Access level" that has been attributed to his ID by the Manager. Refer to
page
Level
At startup, all the menus are locked. The user has to identify himself to get access beyond the
different views. Refer to
18.
Typical rights
0 View parameters, change views
1 + Start / Stop measurements
2 + Calibration
3 + Modify parameters
+ Modify table "User  Access level"
4
+ Enable/Disable "Access right" features
Function keys on the header bar on page
Figure 40 Security menu
Table 2 Access levels
Press the unlock button and OK to access
There is at least one ID having the level 4
Security level table on
Comments
40.
85