B2301, B2601, WSM
(2) Flasher Unit
[7] WARNING LAMP, INDICATOR LAMP AND GAUGE
(1) Instrument Panel
Flasher Unit Connector Voltage
1. Remove the instrument panel.
2. Disconnect the connector (1) from the flasher unit (2).
3. Measure the voltage with a voltmeter across the h terminal and
chassis.
4. If the voltage differ from the battery voltage, the wiring harness
is damaged.
Voltage
h terminal – Chassis
(1) Connector
(2) Flasher Unit
Monitor Lamp (for Charge, Engine Oil Pressure, Pre-heat,
Illumination and Hazard)
1. Removing the meter panel from the tractor.
2. Remove the each lamp.
3. Measure the lamp resistance.
4. If it is infinity, replace the lamp with new.
All lamp
Lamp specification
(1) Illumination
(2) Pre-heat
(3) Hazard
(4) Charge
8-S20
ELECTRICAL SYSTEM
Approx. battery voltage
a:
Frame Earth
b:
Hazard Input
c:
Vacant
d:
Turn Signal (Left) Input
f:
Turn Signal (Right) Output
h:
Battery
i:
Turn Signal (Left) Output
j:
Turn Signal (Right) Input
9Y1211156ELS0036US0
12 V, 1.7 W
(5) Engine Oil Pressure
(6) Position
(7) Turn (R)
(8) Turn (L)
9Y1211156ELS0037US0
KiSC issued 11, 2014 A