Separating Rear Axle Case - Kubota B2301 Workshop Manual

B2301, B2601, WSM

(1) Separating Rear Axle Case

Draining Transmission Fluid
CAUTION
• Stop the engine before checking and changing the
transmission fluid.
1. Place the oil pan under the tractor.
2. Remove the drain plugs (1), (3), (5) at the mid-PTO shaft and at
the bottom of the rear axle cases (4), (6).
3. Drain the transmission fluid.
4. After draining the transmission fluid, reinstall the drain plugs (1),
(3), (5).
IMPORTANT
• Use only KUBOTA UDT oil. Use of other oils may damage
the transmission or hydraulic system.
Refer to "4. LUBRICANTS, FUEL AND COOLANT" on page
G-8.
• Never work the tractor immediately after changing the
transmission oil. Keep the engine at medium speed for a
few minutes to prevents damage to the transmission.
• Do not mix different brands oil together.
Transmission fluid capacity
(1) Drain Plug
(2) Mid-PTO Shaft
(3) Drain Plug
Rear Wheel
1. Place the disassembling stand under the transmission case.
2. Remove the rear wheel (1).
Rear wheel mounting nut
Tightening torque
and screw
(1) Rear Wheel
4-S5
BRAKES
15 L
4.0 U.S.gals
3.3 Imp.gals
(4) Rear Axle Case (L.H.)
(5) Drain Plug
(6) Rear Axle Case (R.H.)
9Y1211156ENS0023US0
145 to 150 N·m
14.8 to 15.2 kgf·m
107 to 110 lbf·ft
9Y1211156BRS0006US0
KiSC issued 11, 2014 A