Independent Pto Lever "Disengaged - Kubota B2301 Workshop Manual

B2301, B2601, WSM

(5) Independent PTO Lever "Disengaged"

When the independent PTO lever (1) is shifted to the
"DISENGAGED" position, the PTO arm (3) is turned to
"OFF" position.
Hydraulic oil is stopped at the PTO arm (3).
This oil flows to the HST port.
Oil in the PTO clutch (4) and the PTO clutch shaft (5)
drains through oil passage S2, S1 and T port to the
transmission case.
(1) Independent PTO Lever
(2) Independent PTO Control
Valve
(3) PTO Arm
(4) PTO Clutch
(5) PTO Clutch Shaft
(6) Transmission Case
2-M25
TRANSMISSION
A: "DISENGAGED" Position
B: "ENGAGED" Position
P: Pump Port
H: HST Port
T: Tank Port
S1: Oil Passage
(in the Transmission Case)
S2: Oil Passage
(in the PTO Clutch Shaft)
9Y1211156TRM0023US0
KiSC issued 11, 2014 A