Omron V430-F-series User Manual page 54

Using ESP
Preferences > Terminal Tab
Show Non-Printable Characters
When Show Non-Printable Characters is enabled, characters such as "CRLF" will be
displayed in the Terminal window. When Enhanced Format is checked, the characters
are displayed with more detailed formatting.
Change Keyboard Macros
Clicking the Change Keyboard Macros button brings up the Function Keys dialog. In
this dialog you can select the desired function key and then enter your macro keystrokes
in the associated key map. For example, to make Ctrl-F2 the keystroke to send a trigger
character, select F2, then in the Ctrl row, enter <trigger character> and click OK. Then
whenever the Ctrl-F2 keystroke is pressed, the trigger character will start the read cycle.
Note: The F1 key is reserved for opening ESP Help and the F3 key is reserved for the
Find Next function.
Change Font
Allows you to modify the font used for decode data received from the reader on the Terminal
screen.
Change Echo Font
Allows you to modify the font used for command characters typed into the Terminal view.
Enable Echo
Allows you to enter command characters in Terminal.
Display Incoming Data Even When Not in Focus
When Display Incoming Data Even When Not in Focus is enabled, data from the reader
will continue to appear in the terminal even when ESP is not the top window.
2-7
Auto Focus Multi Code Reader V430-series User's Manual (Z392)