Table of Contents
Advertisement
Image Push to Host Detailed Setup
RAM Drive Size in MB
Definition:
This defines the maximum RAM Drive size on the system. It is also limited to
the memory available on the system and affects the max. rapid image count in
<K241> since the onboard memory may be taken up by the RAM Drive.
Images may not be saved if the RAM Drive is not large enough to store all the
images in the current read cycle and if Image Storage Location is set to FTP
with Image Save Mode set to Speed. If Image Storage Location is set to FTP
with Image Save Mode set to Accuracy, all images in the read cycle will be
transferred to the FTP host but the read cycle may be delayed.
Serial Cmd:
<K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
Default:
20
Options:
1 to 50
Save Image Until
Definition:
This defines how long the image will be stored in the system when the Image
Storage Location is RAM.
If set to New Read Cycle, the saved image will be erased upon entering the
next read cycle.
If set to System Reset, the saved image will be erased upon the next system
reset.
Serial Cmd:
<K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
Default:
New Read Cycle
Options:
1 = New Read Cycle
2 = System Reset
Action at Image Storage Limit
Definition:
This defines what to do when Action at Storage Full is reached and when
images are saved on RAM. When this setting is set to Erase Oldest First, the
oldest images in the current read cycle will be erased.
Serial Cmd:
<K764,image storage location,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit>
Default:
Stop
Options:
0 = Stop
1 = Erase Oldest First
7-70
Auto Focus Multi Code Reader V430-series User's Manual (Z392)
Hide quick links:
Advertisement
Table of Contents
