Use The Optical Switches - Emerson Micro Motion 1700 Configuration And Use Manual

Using the transmitter display
Figure A-1:
A.
B.
C.
D.
E.
F.
G.
H.
A.2

Use the optical switches

Use the optical switches on the transmitter interface to control the transmitter display.
The transmitter has two optical switches: Scroll and Select.
To activate an optical switch, block the light by holding your thumb or finger in front of the
opening.
Tip
You can activate the optical switch through the lens. Do not remove the transmitter housing cover.
The optical switch indicator lights up when the transmitter senses that an optical switch
has been activated.
212
Transmitter interface
A
B
C
D
E
Status LED
Display (LCD panel)
Process variable
Scroll optical switch
Optical switch indicator
Select optical switch
Unit of measure for process variable
Current value of process variable
®
Micro Motion Model 1700 Transmitters with Analog Outputs
H
G
F