Menu Maps For The Field Communicator - Emerson Micro Motion 1700 Configuration And Use Manual

Transmitters with analog outputs
Hide thumbs Also See for Micro Motion 1700:
Table of Contents

Advertisement

Using the Field Communicator with the transmitter
4.
5.
Postrequisites
To navigate to the Online menu, choose HART Application > Online. Most configuration,
maintenance, and troubleshooting tasks are performed from the Online menu.
Tip
You may see messages related to the DD or active alerts. Press the appropriate buttons to ignore the
message and continue.
D.3

Menu maps for the Field Communicator

280
Figure D-3:
Field Communicator connection to multidrop network
C
A. Field Communicator
Ω resistance
B. 250–600
C. Devices on the network
D. Master device
Turn on the Field Communicator and wait until the main menu is displayed.
If you are connecting across a multidrop network:
a. Set the Field Communicator to poll.
The device returns all valid addresses.
b. Enter the HART address of the transmitter.
The default HART address is 0. However, in a multidrop network, the HART
address has probably been set to a different, unique value.
D
®
Micro Motion
Model 1700 Transmitters with Analog Outputs
B
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents