Enable Or Disable Totalizer Start/Stop From The Display; Enable Or Disable Totalizer Reset From The Display - Emerson Micro Motion 1700 Configuration And Use Manual

5.2.1

Enable or disable Totalizer Start/Stop from the display

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Display > Display Variable Menu Features > Start/Stop Totalizers
Overview
You can control whether or not the operator is able to start and stop totalizers and
inventories from the display.
Restrictions
•
•
•
Procedure
1.
2.
5.2.2

Enable or disable Totalizer Reset from the display

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Display > Display Variable Menu Features > Totalizer Reset
Overview
You can configure whether or not the operator is able to reset totalizers from the display.
Configuration and Use Manual
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > TOTALS STOP
ProLink > Configuration > Display > Display Options > Display Start/Stop Totalizers
Device Tools > Configuration > Totalizer Control Methods
You cannot start and stop totalizers individually from the display. All totalizers are started or
stopped together.
You cannot start or stop inventories separately from totalizers. When a totalizer is started or
stopped, the associated inventory is also started or stopped.
If the petroleum measurement application is installed on your computer, the operator must
enter the off-line password to perform this function, even if the off-line password is not
enabled.
Ensure that at least one totalizer is configured as a display variable.
Enable or disable Totalizer Reset as desired.
Option Description
Enabled
Operators can start and stop totalizers and inventories from the display,
if at least one totalizer is configured as a display variable.
Disabled (default) Operators cannot start and stop totalizers and inventories from the dis-
play.
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > TOTALS RESET
ProLink > Configuration > Display > Display Options > Display Totalizer Reset
Device Tools > Configuration > Totalizer Control Methods
Configure device options and preferences
65