Figure 10: Enter Proxy Server Address; Figure 11: Test Connection - GE PACSystems RX7i Reference Manual

Chapter 2. CPU Features & Specifications
Configure a Network Proxy
A Network Proxy is only required when your network architecture is configured to restrict access directly
to the Internet. Contact your network administrator for the Network Proxy information.
If a network HTTP/HTTPS proxy server is used to route traffic from the intranet to the Internet, the
network proxy must be configured in the Web Console under Technician Console, Network Configuration.
To add or update a network proxy server, check the "Enable HTTP/HTTPS Proxy" check box, enter the
proxy server's address and port in the form "proxy:port" into the Proxy Settings text box, and press the
Save button.

Figure 10: Enter Proxy Server Address

To verify the Field Agent can successfully use the newly configured network proxy to reach the Internet,
use the Test Connection feature of the Field Agent Updater page in the Web Console under Technician
Console, Field Agent Updater. Internet reachability can be tested by using either the default Update URL
or any other desired URL and pressing the Test Connection button.

Figure 11: Test Connection

If the URL is reachable, a Test Connection Succeeded message is displayed below the Test Connection
button after the button is pressed. Otherwise, a message will appear indicating that the Test Connection
attempt failed.
GFK-2222AD April 2018 49