GE PACSystems RX7i Reference Manual page 111

Chapter 2. CPU Features & Specifications
Protocols
Modbus RTU Slave
SRTP (# simultaneous server conns)
(# simultaneous server connections)
SRTP Channel or Modbus TCP Client
(# simultaneous)
Ethernet Global Data (EGD)
Number of EGD Exchanges (max)
Selective Consumption of EGD
OPC-UA Server
Remote Station Manager over UDP
Station Manager over Serial Comm Port
Redundancy Features
Memory Error Checking and Correction
Switchover Time (max)
Switchover Time (min)
Max data in redundancy transfer list
Redundant Synchronized Links
63
Limit is per target, so all producers and consumers are counted towards this limit.
64
CPE100/CPE115(firmware version 9.30 or later) provide PROFINET support with MRP via an embedded PROFINET Controller:
no external hardware is required.
65
Switchover time is defined as the time from failure detection until backup CPU is active in a redundancy system.
66
Symbolic variable and Reference data can be exchanged between redundancy controllers, up to the stipulated limit.
100
CPE100/CPE115
N/A
SNP Slave N/A
Serial I/O N/A
up to 16
Modbus TCP
up to 8
up to 8
63
N/A
64
PROFINET
61
N/A
Y (limited)
N/A
N/A
N/A
(ECC)
65
N/A
65
N/A
66
N/A
N/A
Supported
PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual
Y
8
Y
GFK-2222AD