Configurable Stop Mode Protocols - GE PACSystems RX7i Reference Manual

Chapter 5. Communications

5.2.2 Configurable STOP Mode Protocols

You can configure the protocol to be used in STOP Mode, based upon the configured serial port (RUN
Mode) protocol. The Run/Stop protocol switching is independently configured for each serial port.
The RUN Mode protocol setting determines which choices are available for STOP Mode. If a STOP Mode
protocol is not selected, the default STOP Mode protocol is used. For details, refer to COM1 and COM2
Parameters in Chapter 3.
190 PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual GFK-2222AD