GE PACSystems RX7i Reference Manual page 14

Rev Date Description
▪
V Jun- Addition of RX3i CPE330 (new product) and related Ethernet considerations.
2015
▪
Update of Energy Pack Section 4.11.3 to include ACC402 and compatibility matrix.
▪
Addition of HART
▪
Addition of CPU Comparison Charts (Section 2.2 and Section 2.3).
▪
Update of Communications Section (Chapter 5). Added
▪
RSTi-EP CPE100/CPE115
▪ Serial Port Electrical Isolation
▪
Removed original Chapters 5-11 (chapters dealing with CPU programming) and Chapter 14
(Diagnostics). These are now in PACSystems RX7i and RX3i CPU Programmer's Reference
Manual, GFK-2950 (Chapters 2-8 and Chapter 9 respectively).
▪
U Nov- New Section, A-3.6 for EGD Sweep Impact for RX3i CPE302/CPE305/CPE310 and RSTi-EP
2014
CPE100/CPE115 Embedded Ethernet
▪
T Oct- Support for OPC UA using embedded Ethernet port in CPE305/CPE310 with CPU firmware
2014 8.20.
▪
Support for Ethernet Global Data (EGD Class 1) using embedded Ethernet port in
CPE305/CPE310 with CPU firmware 8.30 Sweep impact of EGD on Embedded Ethernet
interface. Direct replacement for S90-30 IC693CPU374.
▪
New communications capabilities provided by:
GFK-2222AD
®
Pass Through feature (see page 10).
: RS232, RS485 Signals
RS-232 Signals
TX
RX
GND
RTS
CTS
o
IC695PNS001 – PROFINET Scanner Module
o
IC695GCG001 – Genius Communications Gateway via PROFINET
o
IC695EDS001 – Ethernet based DNP3 Outstation
April 2018
RS-485 Pins Signals
Y TX+
Z TX-
A RX+
B RX-
.
Interface
.
Chapter 1. Introduction
3