Fieldbus Interface; Configurable Fieldbus Input Data - GE MM300 Manual

GE
Grid Solutions
MM300 Motor Management System
Chapter 4: Fieldbus interface
NOTE:

Configurable Fieldbus input data

MM300 MOTOR MANAGEMENT SYSTEM – COMMUNICATIONS GUIDE

Fieldbus interface

The Fieldbus interface is configurable as either Profibus DPV0/V1 or DeviceNet. Both
Fieldbus interfaces support control and status – refer to this MM300 Communications
Guide for map details.
Note that external power, 5 to 24 VDC, is required for this interface to operate. (Ensure that
switches 7 and 8 of the DIPswitch on the communication card, are ON.)
A GSD file is provided on the GE Grid Solutions website: http://www.gegridsolutions.com/
app/ViewFiles.aspx?prod=mm300&type=7
NOTE
The Input Data available to the Profibus master can be made user-configurable by using
the Modbus User Map feature available on the MM300.
Configure the setpoint Fieldbus Input Data available in the Communications Settings group
(Home > Setpnts > Cfg > Comms) page from the MM300 Graphical front panel if you have
ordered one with your unit).
4–1