Single Line Parameter Descriptions - Emerson Unidrive M700 User Manual

5.10

Single line parameter descriptions

Table 5.3 lists the coding used for the parameter type in the subsequent parameter description
tables.
Table 5.3 Parameter type coding
Read /
RW RO Read-only Bit
Write
Character
Chr Bin
parameter
Number
Num DE Destination ND
parameter
FI Filtered US User save PS
5.10.1 Menu 0 - Ethernet set-up (MM.ppp)
Table 5.4 Menu 0 parameters
Parameter
00.001 Module ID
00.002 Software Version
00.003 Hardware Version
00.004 Serial Number LS
00.005 Serial Number MS
00.006 Status
00.007 Reset
00.008 Default
00.009 Active Alarm Bits
00.010 Active IP Address
Menu 0 within the Ethernet interface, is also displayed in the drive menu 15, 16, 17 or 24 depending
on which slot the option module is installed to and the setting of the Option Slot Identifiers
parameter (S.11.056).
By default, the SI-Ethernet option module will be either menu 15, 16 or 17 and the onboard
Ethernet interface will be menu 24.
Table 5.5 Menu 0 slot availability details the drive models and their available slots and associated
drive menus for use with both the SI-Ethernet option module and the onboard Ethernet interface.
Table 5.5 Menu 0 slot availability
20
Bit
parameter
Binary
IP IP address Mac
parameter
No default
value
Power-
down save
Range
0 to 65535
00.00.00.00 to 00.99.99.99
0.00 to 99.99
00000000 to 99999999
0 to 99999999
Bootldr - Update (-2),
Bootldr - Idle (-1),
Initializing (0),
OK (1),
Config (2),
Error (3)
Off (0) or On (1)
Off (0) or On (1)
0000000000000000 to
1111111111111111
128.0.0.0 to
127.255.255.255
Txt Text string Date
MAC
Ver
address
Rating
RA NC
dependent
Default
Off (0)
Off (0)
0000000000000000 RO
0.0.0.0
Date Time
Time
parameter parameter
Version Slot, menu,
SMP
number parameter
Non-
PT Protected
copyable
Type
RO Num ND NC PT
RO Ver ND NC PT
RO Num ND NC PT
RO Num ND NC PT
RO Num ND NC PT
RO Txt ND NC PT
RW Bit NC
RW Bit NC
Bin NC
RO IP NC PT
SI-Ethernet User Guide
Issue: 1