Emerson Unidrive M700 User Manual page 40

S.00.005
Minimum
Default
Type
Display Format
Coding
See Serial Number LS (S.00.004)
S.00.006
Minimum
Default
Type
Display Format
Coding
This parameter displays the current status of the module. All possible values are shown
in the table below.
Value
-2
-1
0
1
2
3
S.00.007
Minimum
Default
Type
Display Format
Coding
When set, the module performs a warm reset. When the reset has been performed and
the module is performing it's initialization routines the parameter will be cleared to zero.
The drive, and any other modules fitted to the drive, will not be affected by the reset.
NOTE
40
Serial Number MS
0
32 Bit Volatile
None
RO, ND, NC, PT
Status
-2
8 Bit Volatile
None
RO, TE, ND, NC, PT
Text
Bootldr-Update The bootloader is performing a flash update.
Bootldr-Idle The bootloader is idle.
Initialising Module is currently initializing.
OK Module has initialized and has found no errors.
Config A configuration error has been detected.
An error has occurred preventing the module from
Error
running correctly.
Reset
0
0
1 Bit Volatile
None
RW, NC
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Description
Maximum 1
Units
Read every 200 ms,
Update Rate Written to 0 on module
initialization.
Decimal Places 0
SI-Ethernet User Guide
99999999
Power-up write
0
3
Background
0
Issue: 1