Emerson Unidrive M700 User Manual page 67

Value
0
1
2
3
4
Defines the event to trigger in the given destination, as specified in Rx1 Timeout Event
Destination (S.10.047), if a cyclic data timeout occurs on the Rx1 link.
This feature is not yet implemented.
NOTE
S.10.049
Minimum
Default
Type
Display Format
Coding
Value
-30
-29
-28
-27
-26
-25
-24
-23
-22
-21
-20
-19
-18
-17
-16
-15
-14
SI-Ethernet User Guide
Issue: 1
Text
No Event
Event
Event 1
Event 2
Event 3
Rx1 Link Status
-30
0
8 Bit Volatile
None
RO, TE
Text
VLAN disabled
Reserved 29
Reserved 28
Reserved 27
Reserved 26
Reserved 25
Reserved 24
Reserved 23
Invalid DST IP
SYNC unsupported
MEC offset
Invalid tx rate
Too many mapping
Link busy
Invalid profile
Invalid mapping
Read only param
Description
No event
Trigger module event
Trigger module event 1
Trigger module event 2
Trigger module event 3
Maximum
Units
Update Rate
Decimal Places
Description
VLAN is required in order to guarantee timing in
synchronous mode but it is disabled
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Destination IP address is invalid
Sync link does not support mappings to other option
parameters
Incorrect MEC offset
Tx rate must be a factor of 1 second
The number of mapping items exceeds the range
supported
The link specified is busy
The profile is invalid
The mapped parameter does not exist
The mapped parameter is read only
2
Write on reset
0
67