Emerson Unidrive M700 User Manual page 64

Value
-3
-2
-1
0
1
2
This parameter reports the link's status if it has been loaded. A Reset (S.10.002) is
required to load any changes.
S.10.040
Minimum
Default
Type
Display Format
Coding
Used to select Rx1 as a standard or synchronous cyclic link.
S.10.041
Minimum
Default
Type
Display Format
Coding
This parameter is used to set the link number (1 to 255) for the Rx1 link.
S.10.042
Minimum
Default
Type
Display Format
Coding
This parameter sets the destination parameter for the Rx1 link.
64
Text
Invalid args
Too many links
Out of memory
OK
Not running
OK sync
Rx1 Link Profile
0
0
8 Bit User Save
None
RW, TE
Value
0
Std
1
Sync
Rx1 Link Number
0
0
8 Bit User Save
None
RW, BU
Rx1 Destination Parameter
0
(Display: 0.00.000)
0
(Display: 0.00.000)
32 Bit User Save
Slot Menu Param
RW, BU
Description
Link number / argument zero or invalid
Maximum number of links has been reached
Failed to allocate memory
Configuration of link successful
Ok, not running
Configuration of synchronous link successful
Maximum
Units
Update Rate
Decimal Places
Text
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
1
Read on reset
0
Description
Standard link
Synchronized link
255
Read on reset
0
499999
(Display: 4.99.999)
Read on reset
0
SI-Ethernet User Guide
Issue: 1