Emerson Unidrive M700 User Manual page 92

S.20.001
Minimum
Default
Type
Display Format None
Coding
This parameter is used to enable or disable EtherNet/IP slave functionality.
If either Input Assembly Object Size (S.20.020) or Output Assembly Object Size
NOTE
(S.20.021) is a non zero value then the available mappings will still be consumed even
if the Ethernet/IP functionality is disabled.
S.20.002
Minimum
Default
Type
Display Format
Coding
This parameter is used to perform a warm reset of the protocol interface. When set and
the protocol has reset, the parameter will be reset to zero (Off).
S.20.003
Minimum
Default
Type
Display Format None
Coding
This parameter allows the protocol to be defaulted to factory settings. This includes all
of the protocol features, configuration, mappings and stored objects.
S.20.004
Minimum
Default
Type
Display Format None
Coding
92
Enable EtherNet/IP
0
1
1 Bit User Save
RW, BU
Reset
0
0
1 Bit Volatile
RW, NC
Default
0
0
1 Bit Volatile
RW, NC
Configuration error
0
8 Bit Volatile
RO, TE, ND, NC, PT, BU
Maximum 1
Units
Update Rate Background read
Decimal Places 0
Maximum 1
Units
Background read; written to
Update Rate
0 on initialization
Decimal Places 0
Maximum 1
Units
On module reset, protocol
Update Rate interface reset or protocol
enable
Decimal Places 0
Maximum 8
Units
Update Rate Background
Decimal Places 0
SI-Ethernet User Guide
Issue: 1