Emerson Unidrive M700 User Manual page 73

This parameter reports the link's status if it has been loaded. A Reset (S.10.002) is
required to load any changes.
S.10.060
Minimum
Default
Type
Display Format
Coding
Used to select Rx3 as a standard or synchronous cyclic link.
S.10.061
Minimum
Default
Type
Display Format
Coding
This parameter is used to set the link number (1 to 255) for the Rx3 link.
S.10.062
Minimum
Default
Type
Display Format
Coding
This parameter sets the destination parameter for the Rx3 link.
S.10.063
Minimum
Default
Type
Display Format
Coding
This parameter is used to set the number of contiguous parameters for the Rx3 link.
SI-Ethernet User Guide
Issue: 1
Rx3 Link Profile
0
0
8 Bit User Save
None
RW, TE
Value
0
Std
1
Sync
Rx3 Link Number
0
0
8 Bit User Save
None
RW, BU
Rx3 Destination Parameter
0
(Display: 0.00.000)
0
(Display: 0.00.000)
32 Bit User Save
Slot Menu Param
RW, PT, BU
Rx3 Parameter Count
0
0
8 Bit User Save
None
RW, BU
Maximum 1
Units
Update Rate Read on reset
Decimal Places 0
Text
Standard link
Synchronized link
Maximum 255
Units
Update Rate Read on reset
Decimal Places 0
499999
Maximum
(Display: 4.99.999)
Units
Update Rate Read on reset
Decimal Places 0
Maximum 10
Units
Update Rate Read on reset
Decimal Places 0
Description
73