Parameter Descriptions - Emerson Unidrive HS72 Control Getting Started Manual

5.1

Parameter descriptions

5.1.1 Pr mm.000
Pr mm.000 is available in all menus, commonly used functions are provided as text strings in
Pr mm.000 shown in Table 5-1. The functions in Table 5-1 can also be selected by entering the
appropriate numeric values (as shown in Table 5-2) in Pr mm.000. For example, enter 7001 in
Pr mm.000 to erase the file in NV media card location 001.
Table 5-1 Commonly used functions in Pr mm.000
String
Save parameters
Load file 1
Save to file 1
Load file 2
Save to file 2
Load file 3
Save to file 3
Show non-default
Destinations
Reset 50 Hz Defs
Reset 60 Hz Defs
Reset modules
Read Enc.NP P1
Read Enc.NP P2
Unidrive M702 / HS72 Control Getting Started Guide
Issue Number: 2
Save parameters when under voltage is not active and low voltage threshold is not
active
Load the drive parameters or user program file from NV media card file 001
Transfer the drive parameters to parameter file 001
Load the drive parameters or user program file from NV media card file 002
Transfer the drive parameters to parameter file 002
Load the drive parameters or user program file from NV media card file 003
Transfer the drive parameters to parameter file 003
Displays parameters that are different from defaults
Displays parameters that are set
Load parameters with standard (50 Hz) defaults
Load parameters with US (60 Hz) defaults
Reset all option modules
Transfer electronic nameplate motor parameters to the drive from the P1 encoder
Transfer electronic nameplate motor parameters to the drive from the P2 encoder
Action
27