Emerson Unidrive M700 User Manual page 96

S.20.016
Minimum
Default
Type
Display Format None
Coding
Value
0
1
2
3
4
This parameter defines the destination slot to trigger the event upon a PLC idle event.
This feature is not yet implemented.
NOTE
S.20.017
Minimum
Default
Type
Display Format None
Coding
Value
0
1
2
3
4
5
Defines the event to trigger in the specified destination (PLC idle event destination
(S.20.016)) upon a PLC idle event.
This feature is not yet implemented.
NOTE
96
PLC idle event destination
0
0
8 Bit User Save
RW, TE, BU
Text
This slot
Slot 1
Slot 2
Slot 3
Slot 4
PLC idle event type
0
0
8 Bit User Save
RW, TE, BU
Text
No event
Trigger Event
Trigger Event 1
Trigger Event 2
Trigger Event 3
Trigger Event 4
Maximum
Units
Update Rate
Decimal Places
Description
Trigger event in this slot
Trigger event in slot 1
Trigger event in slot 2
Trigger event in slot 3
Trigger event in slot 4
Maximum
Units
Update Rate
Decimal Places
Description
No event
Trigger module Event
Trigger module Event 1
Trigger module Event 2
Trigger module Event 3
Trigger module Event 4
4
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
0
5
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
0
SI-Ethernet User Guide
Issue: 1