Table of Contents
Advertisement
Item
Direction
Paper Cut
Feed to Cut Position
Drawer
*1:
Mark displayed when [Direction] is set to "Front to Back".
*2:
Mark displayed when [Orientation] is set to "Portrait".
*3:
The mark is displayed at the upper left when [Print Start] is set for the drawer and at
the lower right when [Print End] is set in "3.4.7 Displaying [Option Settings] Window".
3.4.3 Checking Categories in [Setting List]
The following table describes the functional categories displayed in the [Setting List].
Category
General Settings
Paper Cut/Marked Paper
Settings
Option Settings
Setting items for each category are described in subsequent sections.
* 2
Front to Back
None
Full Cut
(Each page)
Enabled
Sets basic items such as initialization and print speed.
Sets parameters about the paper cut and the black mark
detection when using marked paper.
Sets the operations at specific print timings.
3-6
Mark
Back to Front
Full Cut
(Each job)
Partial Cut
(Each page)
(Between pages)
Disabled
* 3
Description
* 2
Partial Cut
(Each job)
Partial Cut
Advertisement
Table of Contents
