Table of Contents
Advertisement
3.5.7 Displaying [ControlA Font Settings] Window
Select [ControlA Font Settings] in the [Setting List] to display the window below.
Item
Char
Hex
Command
Print
Edit...
Delete
*1:
Not available when a blank [Command] field is selected in the list.
*2:
Not available from the printing preferences window that was started when printing
from an application. To use these options, start the [Printing Preferences] window
from the Printer folder.
Screen 3-12 [ControlA Font Settings] window
Displays characters to assign printer commands.
Displays the hexadecimal codes for [Char].
Displays printer commands set.
To enter a command, use the binary editor which is displayed
by clicking the [Edit...] button.
Runs the command selected in the list.
Starts the binary editor.
Data entered in the binary editor is displayed in [Command]
selected in the list.
Up to 256 bytes can be specified.
For details of the binary editor, see "3.4.8 Using Binary Editor".
Clears the [Command] field selected in the list.
3-27
Description
* 1
* 2
* 1,* 2
Advertisement
Table of Contents
