Terms - Seiko RP-E10 Operation Manual

Terms

This section describes terms used in this document.
Definition
Tool
Communication library
Technical reference
Memory switch
NV image
*1
IPD font
Special font
Head drive
Maintenance counter
Printer command
Printer status
*1:
Various tools which can be started by the printer driver.
Dynamic link library (DLL) for application development provided
with the printer driver, designed to directly communicate with a
printer to control it.
Technical reference for the printer main body.
Feature for the [Function setting] described in the technical
reference.
Image data that is registered in the NV memory (non-volatile
memory) in the printer.
Generic name of the following fonts specific to the printer driver.
·Device font
·Barcode font
·2D-barcode font
·Control font
·ControlA font
Generic name of the following fonts in the IPD font, which are
used to output printer commands.
·Barcode font
·2D-barcode font
·Control font
·ControlA font
Setting for the thermal head to be divided into several blocks for
printing.
Maintenance counter value which can be obtained by a printer
command.
Instruction to control the printer, described in the technical
reference.
Response obtained by the "Automatic Status Back
Enable/Disable" command of the printer.
For details of response, see "5.2.3 Checking Printer Status
Data".
Integrated Printer Driver (hereinafter called IPD)
Description
Introduction - 3