Limitation - Seiko RP-E10 Operation Manual

MS No.
MS40 – 5
MS40 – 6
MS40 – 7
MS40 – 8
*1:
*2:
*3:
*4:
*5:
Caution
 Although it is possible to use the tool to override above settings, it may prevent the
printer driver from working properly.

1.4 Limitation

When you use the printer driver, pay attention to the following limitations.
Abnormal printing in standby mode (Windows XP), sleep mode (Windows Vista and

Windows 7), or hibernate mode, which is a part of the Windows standard function, is not
guaranteed including garbled characters.
If the setting of dedicated print processor (SII Print Processor) including FILE output is

disabled, all reduction function is disabled.
If the printer is disabled in "Peripheral Equipment Selection" command, all function in the

printer driver is not available.
If the same IP address is specified with more than one computer for installing the printer

driver when using TCP/IP connection, the tool and the communication library are not
available with more than one computer at one time.
For TCP/IP connection, set Network Printer Receive Timeout(s) to 300 in the TCP/IP

port on the WEB settings screen.
Flow Control Method Selection
(Flow Control)
Printer Busy Control Selection
(Printer Busy)
Host Busy Control Selection
(Host Busy)
Break Signal Selection
(Break)
Required if executing Marked Paper Form Feed.
Use this setting usually. However, if you do not select the [Enable bidirectional
support] check box described in "4.4 Port", this setting should be set to "Disable".
Required only to get [Initialization Response] in the communication library.
Required condition for TCP/IP connection.
Required conditions to use the printer driver.
Item
1-3
Settings
1 :Hardware control
*5
1 :RTS control
0 :CTS and DSR control
*5
1 :RxD
*5