New Installation Method; Common Installation Procedure - Seiko RP-E10 Operation Manual

2.2 New Installation Method

This section describes the new installation method.
Caution
 Do not install more than one driver for the same communication port.

2.2.1 Common Installation Procedure

This section describes the procedure of starting installation used for every connection.
1. Start the installation program (InstDrv.exe).
2. When the information on the printer driver to install is displayed, click the [Next>]
button.
3. When the "SOFTWARE LICENSE AGREEMENT" is displayed, read it carefully, select
"Agree", and then click the [Next>] button.
4. When the setup type selection window is displayed, select "Install or Setup", and then
click the [Next>] button.
Screen 2-1 Information on printer driver to install
Screen 2-2 Select setup type
2-2