Installation With Tcp/Ip Connection - Seiko RP-E10 Operation Manual

2.2.4 Installation with TCP/IP connection

This section continues to describe the installation procedure of the TCP/IP connection.
5. When the installation method selection window is displayed, select "Manual install"
and "Add New Port...".
6. When the new port creation window is displayed, select "Standard TCP/IP Port" and
specify [IP], [Port name], and [Port], and then click the [OK] button. When the port is
added to the port list on the installation method selection window, click the [Next>]
button.
Screen 2-10 Select installation method (TCP/IP connection)
Screen 2-11 New port creation
2-6