Table of Contents
Advertisement
Item
Settings
Image
Keycode
Position
Test Print
Info
Print
*1:
When you select other than "None", the IPD font cannot be used.
*2:
Not displayed when [Image] is set to "None".
3.6.5 Using Watermark
This section describes the procedure to use the watermark.
1. Register an image used for the watermark in "5.6 NV Image".
2. Select "NV Image" for [Image] in the [Watermark Settings] window of [Printing
Preferences].
3. Enter the keycode of the image used as the watermark in [Keycode].
4. Select the alignment of the watermark in [Position].
5. Click the [Apply] button.
Description ("
Sets parameters about the watermark.
Sets the type of the image used as the watermark.
·None
·NV Image
Enters the keycode of the image used as the watermark.
·00 to 99
Selects the alignment of the watermark.
·Top Left
·Top Center
·Top Right
·Left
·Center
·Right
·Bottom Left
·Bottom Center
·Bottom Right
Sets parameters about the test print.
Selects whether or not to include the setting content in the test print.
·ON
·OFF
Prints the watermark with the entered settings and data.
3-32
": Initial Value)
* 1
* 2
* 2
* 2
Advertisement
Table of Contents
