Table of Contents
Advertisement
Chapter 5
5.1 Overview
This chapter describes various tools which can be started from the printer driver.
These tools can be started from the [Tool] window of the [Properties] dialog. It is also
possible to go to another tool from the tool panel at the top of the window displayed after
starting a tool.
The following types of tool are provided:
Information
Memory Switch
Log
Test Print
NV Image
Codepage
Other
Caution
To use all functions of the various tools, log on to the computer with administrator
privileges is required.
When [Enable bidirectional support] is not selected in "4.4 Port", these tools cannot be
started.
No operation is available in the [Properties] dialog while any tool is running.
Tool
: Displays the information of the printer.
: Sets the memory switch.
: Sets the log output of the printer driver.
: Performs the test print with arbitrary content
: Edits and registers the image to be used as the logo or watermark,
or manages the registered NV images.
: Edits and registers the font data that the user can register, or
manages the registered codepages.
: Exports the printer driver setting to a file, or imports an exported file.
5-1
Advertisement
Table of Contents
