Q8: Wifi Module Support Udp Multicast - Waveshare WIFI232 User Manual

WAVESHARE ELECTRONICS

Module 1# Setting:
 Works as AP mode;
 LAN IP address: 10.10.100.254;
 Network Protocal:TCP/Client, Port ID: 8899; Application IP address:10.10.100.100;

Module 2# Setting:
 Works as STA mode;
 WAN connection type: Static IP: 10.10.100.101;
 Network Protocal:TCP/Client, Port ID: 8899; Application IP address:10.10.100.100;
 LAN IP address: 10.10.99.254 (Different net segment with WAN port);

Module 3# Setting:
 Works as STA mode;
 WAN connection type: Static IP: 10.10.100.102;
 Network Protocal:TCP/Client, Port ID: 8899; Application IP address:10.10.100.100;
 LAN IP address: 10.10.98.254 (Different net segment with WAN port);

Q8: WIFI module support UDP multicast?

At present, all the WIFI module does not support UDP multicast function,IP multicast address
range is "224.0.0.0~ 239.255.255.255",When setting module, please don't set this IP section, if
set, may cause the module can't normal start.
Figure 59 Wireless Data Acquisition Card Setting
Page 79 of 81
WIFI232 User Manual