Ethernet Setting; Httpd Client Mode - Waveshare WIFI232 User Manual

WAVESHARE ELECTRONICS
WIFI232 User Manual

5.1.7 Ethernet Setting

This page is used to set Ethernet front-end ports of the module, It can be open or closed.And
also can be set to the WAN port to use, this module can be used as a secondary router, making it
easy for users to network.Specific Settings page is as follows:
Figure 32 Ethernet Setting Page

5.1.8 HTTPD Client Mode

This page sets the HTTP header in the HTTPD Client mode.Include: the address of the server,
the server port, request type, protocol header path, Connection, user-agent.
HTTPD Client mode support POST, PUT, GET three HTTP request types.Is a POST or PUT
request way, serial data can be added to the back of the HTTP header;When the request is a
GET, data can be added to the back of the path in the HTTP header.The specific way of sending
data can consult section 4.2.4.
Figure 33 HTTPD Client Mode Page
Page 42 of 81