Web Accessing And At+Instruction Set; Configuration Via Web Accessing; Open Web Management Interface - Waveshare WIFI232 User Manual

WAVESHARE ELECTRONICS

5 Web Accessing and AT+instruction set

5.1 Configuration via Web Accessing

When first use WIFI232 modules, user may need some configuration. User can connect to
WIFI232 module‟s wireless interface with following default setting information and configure the
module through laptop.
Parameters
SSID
IP Address
Subnet Mask
User Name
Password

5.1.1 Open Web Management Interface

Step 1: Connect laptop to SSID "WIFI232" of WIFI232 module via wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access "http://10.10.100.254";
Step 3: Then input user name and password in the page as following and click "OK" button.
The WIFI232 web management page support English and Chinese language. User can select
language environment at the top right corner and click "Apply" button.
The main menu include five pages: "Mode Selection"," AP Interface Setting","STA Interface
Setting","Application Setting", "WEB IO"and "Device Management"
Table 6 WIFI232 Web Access Default Setting
Default Setting
WIFI232
10.10.100.254
255.255.255.0
admin
admin
Figure 26 Open Web Management page
Page 37 of 81
WIFI232 User Manual