Q6: How To Avoid Ip Address Confliction When Apply Wifi232 Module; Q7: Pc Works As Server, All Wifi Modules Works As Data Acquisition Card And Connect With Pc, How To Configure This Application - Waveshare WIFI232 User Manual

WAVESHARE ELECTRONICS
Figure 58 Two WIFI232 Modules Connection Through AP
Q6: How to avoid IP address confliction when apply WIFI232
module?

The following address allocation method can avoid the IP address confliction for dynamic and
static IP address mixed application.

Module dynamic IP address range from 100 to 200 for last IP address segment.
 Such as default IP: 10.10.100.254. When module works as AP, the IP address module
can allocate to STA is from 10.10.100.100 to 10.10.100.200;

So, if user needs to set static IP for dedicated STA internal network, the available IP
address range can start from 10.10.100.1 to 10.10.100.99.
Q7: PC works as server, all WIFI modules works as data acquisition
card and connect with PC, how to configure this application?

Network structure as below figure: Three WIFI232 module setup 3 TCP links with PC server.
Module 1# works as AP and all devices connect to module 1# through WiFi interface;

PC Setting:
 IP address: 10.10.100.100;
 Network Protocal:TCP/Server, Port ID: 8899;
Page 78 of 81
WIFI232 User Manual