Table of Contents
Advertisement
WAVESHARE ELECTRONICS
5.2.2.2.40
AT+RELD
Function: Restore to factory default setting;
Format:
AT+ RELD<CR>
+ok=rebooting...<CR>< LF ><CR>< LF >
This command restores the module to factory default setting, and then re-starts the module.
5.2.2.2.41
AT+Z
Function: Re-start module;
Format:
AT+ Z<CR>
5.2.2.2.42
AT+MID
Function: Query module ID information;
Format:
Query Operation
AT+MID<CR>
+ok=<module_id><CR>< LF ><CR>< LF >
Parameters:
module_id: MID information;
5.2.2.2.43
AT+VER
Function: Query module software version information;
Format:
Query Operation
AT+VER<CR>
+ok=<ver><CR>< LF ><CR>< LF >
Parameters:
ver: Module software version information;
5.2.2.2.44
AT+H
Function: Help;
Format:
Query Operation
AT+H<CR>
+ok=<command help><CR>< LF ><CR>< LF >
Parameters:
command help: command introduction;
5.2.2.2.45
AT+ HTTPURL
Function:Set /Query HTTP server IP address and Port Number.
Format:
Query Operation:
AT+HTTPURL<CR>
+ok=<IP,Port><CR>< LF ><CR>< LF >
Set Operation:
AT+HTTPURL=<IP,Port><CR>
+ok<CR>< LF ><CR>< LF >
A11-yymmddnnnn "yymmdd" date; "nnnn" serial number;
Page 63 of 81
WIFI232 User Manual
Advertisement
Table of Contents
