Device Paremeters - Waveshare WIFI232 User Manual

Table of Contents

Advertisement

WAVESHARE ELECTRONICS
Support UART/GPIO/Ethernet Data Interface
Support Work As STA/AP/AP+STA Mode
Support Router/Bridge Mode Networking
Support Internal/External Antenna Option
Support Transparent Transmission Mode
Support AT+ Instruction Set for Configuration
Support Friendly Web Configuration Page
Support Palmodic Signal
Support UART Auto-Frame Function
Single +3.3V Power Supply
FCC/CE Certificated

2.3 Device Paremeters

Class
Wireless
Parameters
Hardware
Parameters
Software
Parameters
Table 1 WIFI232 Module Technical Specifications
Item
Certification
Wireless standard
Frequency range
Transmit Power
Receiver Sensitivity
Antenna Option
Data Interface
Operating Voltage
Operating Current
Operating
Temperature
Storage Temperature
Dimensions and Size
Network Type
Security Mechanisms
Encryption
Page 10 of 81
Parameters
FCC/CE
802.11 b/g/n
2.412GHz-2.484GHz
802.11b: +20 dBm (Max.)
802.11g: +18 dBm (Max.)
802.11n: +15 dBm (Max.)
Configurable
802.11b: -89 dBm
802.11g: -81dBm
802.11n: -71dBm
External:I-PEX Connector
Internal:On-board chip antenna
UART: 300bps - 460800bps
GPIOs
Ethernet: 100Mpbs
3.3V (+/-5%)
170mA~300mA
-25℃- 85℃
-40℃- 125℃
25×40×8mm
Station /AP mode/STA+AP
WEP/WAP-PSK/WAP2-PSK/WAPI
WEP64/WEP128/TKIP/AES
WIFI232 User Manual

Advertisement

Table of Contents
loading

Table of Contents