WAVESHARE ELECTRONICS
Appendix A: Questions and Answers
Q1: How to configure transparent serial port application (TCP
protocol) with two
Network structure as below figure:
Module 1# Setting:
Works as AP mode;
LAN IP address: 10.10.100.254;
Network Protocal:TCP/Server, Port ID: 8899; -- See "Application Setting Page"
(Module default setting);
Module 2# Setting:
Works as STA mode;
WAN connection type: DHCP or Static IP (For this example:10.10.100.100)
Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Module 1#‟s LAN
IP address (10.10.100.254);
Notes: When module 2# works as STA mode, module‟s WiFi interface works as WAN
port. Module‟s WAN IP address and LAN IP address shall be setting different segment.
So, module 2#‟s LAN IP address must change to other segment; (For this sample, we
change to 10.10.99.254);
Figure 51 Configure Transparent Serial Port Connection (TCP)
Q2: Where to Set WIFI Module LAN IP and WAN IP through Web
Page?
WIFI232 Wireless LAN IP address setting see "AP Interface Setting Page" as below Figure,
modules?
WIFI
--See "AP Interface Setting Page"
Page 74 of 81
WIFI232 User Manual
--See "Mode Selection Page"
--See "AP Interface Setting Page"
--See "Mode Selection Page"
--See "STA Interface Setting Page"
-- See "Application Setting Page"