Table of Contents
Advertisement
WAVESHARE ELECTRONICS
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.13
AT+WEBU
Function: Set/Query WEB page login parameters;
Format:
Query Operation
AT+WEBU<CR>
+ok=<usr,password><CR>< LF ><CR>< LF >
Set Operation
AT+ WEBU=< usr,password ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
usr: User name for WEB page access;
password：Password for WEB page access;
5.2.2.2.14
AT+WAP
Function: Set/Query WIFI parameters as AP;
Format:
Query Operation
AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF >
Set Operation
AT+ WAP=<wifi_mode,ssid,channel><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
wifi_mode: WiFi protocols
ssid: SSID when module works as AP;
channel: WIFI channel selection
This Instruction only effective for WIFI232 works as AP. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as STA.
5.2.2.2.15
AT+WAKEY
Function: Set/Query WIFI security parameters as AP;
Format:
Query Operation
AT+WAKEY<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
"AP‟ SSID（AP‟s MAC" ）, if WiFi connection available;
"RF Off", if WiFi OFF;
11BG
11B
11G
11BGN
11N
AUTO
CH1~CH11
Page 54 of 81
WIFI232 User Manual
Advertisement
Table of Contents
