Table of Contents
Advertisement
WAVESHARE ELECTRONICS
+ok<CR><LF><CR><LF>
Parameters:
Sta: when query, this value feedback
5.2.2.2.34
AT+DOMAIN
Function: Set/Query domain of module webpage;
Format
Query Operation
AT+DOMAIN<CR>
+ok=<domian><CR><LF><CR><LF>
Set Operation
AT+DOMAIN=<domain><CR>
+ok<CR><LF><CR><LF>
Parameters:
5.2.2.2.35
AT+FUDLX
Function: Enable/Disable 485 function;
Format:
Query Operation
AT+FUDLX<CR>
+ok=<on/off><CR><LF><CR><LF>
Set Operation
AT+FUDLX=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:
On/off: Enable or Disable 485 function
Notes: AT+FUDLX is F-Setting, means restore to factory setting will not affect this command.
5.2.2.2.36
AT+MMID
Function: Set/Query Device ID;
Format:
Query Operation
AT+MMID<CR>
+ok=<time><CR>< LF ><CR>< LF >
Set Operation
AT+ MMID=<time><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ID: device id(0~65535)
After WIFI232 module boots up again, the setting will be effective.
5.2.2.2.37
AT+IDFIR
On: Enable STA port scan function
Off: Disable STA port scan function
domain: domain to access to module webpage
On, enable 485 function;
Off, disable 485 function;
Page 61 of 81
WIFI232 User Manual
Advertisement
Table of Contents
