Table of Contents
Advertisement
WAVESHARE ELECTRONICS
+ok<CR><LF><CR><LF>
Parameters:
sta. If Enable/Disable LAN DHCP server function;
5.2.2.2.24
AT+ DHCPGW
Function: Set/Query DHCP gateway address;
Format:
Query Operation
AT+ DHCPGW<CR>
+ok=<address><CR>< LF ><CR>< LF >
Set Operation
AT+ DHCPGW=<address ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
address: DHCP gate address;
5.2.2.2.25
AT+ TCPTO
Function: Set/Query TCP timeout;
Format:
Query Operation
AT+ TCPTO<CR>
+ok=<time><CR>< LF ><CR>< LF >
Set Operation
AT+ TCPTO=<time ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
time: TCP timeout time.
TCP timeout: module began to count when TCP channel did not receive any data, receive data purge
count.If the timing time exceed TCPTO, disconnect the TCP channel.If module work in TCP Client , it
will take the initiative to rewiring the TCP Server, If module work in the TCP Server, the TCP Client
need active reconnection.
5.2.2.2.26
AT+ MAXSK
Function: Set/Query maxima TCP connection;
Format:
Query Operation
AT+ MAXSK<CR>
+ok=<num><CR>< LF ><CR>< LF >
Set Operation
AT+ MAXSK =<num ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
on: Enable LAN DHCP function
off: Disable LAN DHCP function
<= 600, (600s);
>=0, (0 means no timeout);
Default, 300s;
Page 58 of 81
WIFI232 User Manual
Advertisement
Table of Contents
