Q5: How To Configure Transparent Serial Port Application: Two Wifi Modules All Configured As Sta And Connection Through Ap - Waveshare WIFI232 User Manual

WAVESHARE ELECTRONICS

Port ID required: 8899 (Default)
Q5: How to configure transparent serial port application: Two WIFI
modules all configured as STA and connection through AP?

Network structure as below figure:

Module 1# Setting: ( We use WIFI232 as AP for this example)
 Works as AP mode and all default setting;

Module 2# Setting:
 Works as STA mode;
 WAN connection type: Static IP: 10.10.100.100; --See "STA Interface Setting Page"
 Network Protocal:TCP/Server, Port ID: 8899;
 LAN IP address: 10.10.99.254 (Different net segment with WAN port);

Module 3# Setting:
 Works as STA mode;
 WAN connection type: Static IP: 10.10.100.101; --See "STA Interface Setting Page"
 Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Module 2#‟s WAN
IP address (10.10.100.100);
 LAN IP address: 10.10.98.254 (Different net segment with WAN port);
Figure 57 Module Network Protocol: UDP
Page 77 of 81
WIFI232 User Manual
--See "Mode Selection Page"
-- See "Application Setting Page"
--See "AP Interface Setting Page"
--See "Mode Selection Page"
-- See "Application Setting Page"
--See "AP Interface Setting Page"