Table of Contents
Advertisement
WAVESHARE ELECTRONICS
Query Operation
AT+UART<CR>
+ok=<baudrate,data_bits,stop_bit,parity,flowctrl><CR>< LF ><CR>< LF >
Set Operation
AT+UART=<baudrate,data_bits,stop_bit,parity,flowctrl><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
baudrate:
data_bits:
stop_bits:
parity:
flowctrl：hardware flow control (CTSRTS)
After WIFI232 module boots up again, the setting will be effective.
5.2.2.2.5 AT+UARTF
Function: Open/Close UART auto-frame function;
Format:
Query Operation
AT+ UARTF<CR>
+ok=<para><CR>< LF ><CR>< LF >
Set Operation
AT+ UARTF=<para ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
para:
5.2.2.2.6 AT+UARTFT
Function: Set/Query UART auto-frame trigger time;
Format:
Query Operation
AT+ UARTFT<CR>
+ok=<time><CR>< LF ><CR>< LF >
Set Operation
AT+ UARTFT=<time ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
300,600,1200,1800,2400,4800,9600,19200,38400,57600,115200,230400,345
600,460800
5,6,7,8
1,2
NONE,EVEN,ODD,MARK,SPACE
NFC: No flow control
FC: flow control
disable
- Close auto-frame function;
enable
- Open auto-frame function;
Page 51 of 81
WIFI232 User Manual
Advertisement
Table of Contents
