WAVESHARE ELECTRONICS
Format:
Query Operation
AT+WSKEYA<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation
AT+ WSKEYA=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
auth: Authentication mode
encry:Encryption algorithm
key: password, ASCII code, shall less than 64 bit and greater than 8bit
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.54
AT+WSKEYB
Function:
Format:
Query Operation
AT+WSKEYB<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation
AT+ WSKEYB=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
auth: Authentication mode
encry:Encryption algorithm
key: password, ASCII code, shall less than 64 bit and greater than 8bit
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.55
AT+WSKEYC
OPEN
SHARED
WPAPSK
NONE: When "auth=OPEN", effective
WEP: When "auth=OPEN" or "SHARED", effective
TKIP: When "auth= WPAPSK", effective
AES:
When "auth= WPAPSK", effective
Set/query the second AP„s password of 3 sta parameters settings .
OPEN
SHARED
WPAPSK
NONE: When "auth=OPEN", effective
WEP: When "auth=OPEN" or "SHARED", effective
TKIP: When "auth= WPAPSK", effective
AES:
When "auth= WPAPSK", effective
Page 66 of 81
WIFI232 User Manual