Connecting The Sensor Head To The Amplifier Unit - Omron ZX2-LDA41 User Manual

Connecting the Sensor Head to the Amplifier Unit

CONTENTS
Installation Method
INTRODUCTION
Align the position of the connector
insert the connector until it is locked in place.
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
Important
MAIN
APPLICATIONS
• Extending the Sensor Head cable
& SETTING
METHODS An optional extension cable (ZX2-XC R) must be used.
Only one extension cable can be used.
Height
Be sure to attach the two supplied ferrite cores within 100 mm of each end of the extension
Steps
cable.
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
28
Installation
mark with the
Within 100 mm
30
16.5 dia.
Made by TDK Corporation ZCAT1730-0730A
mark on the Amplifier Unit, and
Within 100 mm Within 100 mm
ZX2 User's Manual