Flow Of Operation; Scaling - Omron ZX2-LDA41 User Manual

Scaling

Scaling:
The display scale can be changed when you want to display a digital value on the
Amplifier Unit different from the actual measured value. (For example, when you want
to set the measured value as the actual measuring distance.)
Procedure for setting up scaling
Set to the MENU mode
Scaling
Return to RUN mode
Setting completed
1
Set to the MENU mode
Button
Display
Operation
Hold down for
3 seconds
Press to display.
2
Scaling
Button
Display
Operation
ZX2 User's Manual
Description of Operation
Hold down the
Lit
three seconds to switch to the
MENU mode.
Press the button to display
.
Press the button to set the
display to to set display of
the detail menu.
Press the button to apply
the setting.
Description of Operation
Press the button to display
.
Setting channels used when
connecting multiple units: Each CH
Explanation of
Selection Menu
button for
* This step is not required if
detail menu display is
already set to ON in the
MENU mode.
Explanation of
Selection Menu
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
Default value: OFF
INDEX
SETTING
TRANSITION
CHARTS
105
Scaling
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection