Omron ZX2-LDA41 User Manual page 62

7
Hold
(Use CH2 for these settings.)
Button
CONTENTS
Operation
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
Press to select
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
62
Thickness
Set this item to hold measured values during the measurement
Optional
period according to preset hold conditions.
Display Description of Operation
Press the
Amplifier Unit to display
Press the
hold conditions.
Select the
desired value.
Press the
the setting.
When other than
selected, proceed to "8
Trigger conditions," and
when
proceed to "9 Threshold
setting."
button on the CH2
.
button to select the
Hold OFF
The average measured value
during the sampling period is
held.
The difference between the
minimum and maximum
values during the sampling
period is held.
The measured value at the
start of the sampling period is
held.
The minimum value during
the sampling period is held.
The maximum value during
the sampling period is held.
(For details, see page 95.)
button to apply * The clamp value is output
until the first sampling period
is finished.
is (For details on the clamp
value, see page 111.)
is selected,
Explanation of
Selection Menu
Default value: OFF
ZX2 User's Manual