Omron ZX2-LDA41 User Manual page 107

Button
Display
Operation
[Change numeric value]
[Numeric value
Press to set.
before change]
Set any value.
[Change numeric value]
[Numeric value
Press to set.
after change]
Set any value.
3
Return to RUN mode
Button
Display
Operation
Hold down for
3 seconds
ZX2 User's Manual
Description of Operation
Press the button to display
.
Press the button to enable
setting of S2-Before.
Press the button to move
the digit, press the
change the numeric value, and
set the measured value before
S2 is changed.
Press the button to apply
the numeric value of S2-Before.
Press the button to display
.
Press the button to enable
setting of S2-After.
Press the button to move
the digit, press the
change the numeric value, and
set the measured value after S2
is changed.
Press the button to apply
the numeric value of S2-After.
Description of Operation
Hold down the
Out
three seconds to switch to the
RUN mode.
Explanation of
Selection Menu
58
42
8
-8
S1
* If the
when the cursor is at the
button to
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
button to
Explanation of
Selection Menu
button for
CONTENTS
After
Before
INTRODUCTION
PREPARATION
S2
FOR
button is pressed
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
SETTING
TRANSITION
CHARTS
Scaling
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
INDEX
107